| Abu: | PTFE+FPM | Mai jarida: | Ruwa, Mai, Gas, Base, Mai Da Acid |
|---|---|---|---|
| Girman Port: | DN50-DN600 | Aikace-aikace: | Bawul, gas |
| Sunan samfur: | Nau'in Wafer Centreline Soft Seling Butterfly Valve, Wafer Butterfly Valve | Launi: | Bukatar Abokin Ciniki |
| Haɗin kai: | Wafer, Flange ya ƙare | Daidaito: | ANSI BS DIN JIS,DIN,ANSI,JIS,BS |
| wurin zama: | EPDM/NBR/EPR/PTFE,NBR,Rubber,PTFE/NBR/EPDM/FKM/FPM | Nau'in Valve: | Valve Butterfly, Nau'in Lug Biyu Rabin Shaft Butterfly Valve Ba tare da Fil ba |
| Babban Haske: |
ptfe wurin zama malam buɗe ido bawul, wurin zama malam buɗe ido bawul, malam buɗe ido bawul PTFE wurin zama |
||
PTFE & FPM bawul wurin zama don resilient wurin zama malam buɗe ido bawul 2 ''-24''
Fa'idodin EPDM+FPM:
1. maye gurbin zoben rufewa na PTFE mai tsabta
2. rage farashin da inganta karfin juyi ta hanyar amfani da elasticity na roba.
Bayani:
1. Wurin zama bawul ɗin malam buɗe ido nau'in ƙirar sarrafa kwarara ne, yawanci ana amfani da shi don daidaita o ruwan da ke gudana ta wani ɓangaren bututu.
2. Ana amfani da kujerun bawul na roba a cikin batsa mai ƙyalli na belves ga maƙasudi. Ana iya yin kayan kujerar daga yawancin elastomers da yawa ko poldu, ciki har da PTFE, NBR, Fkm / FPDM, da sauransu
3. Ana amfani da wannan kujerar bawul na FTPM don kujerun bading mai ban sha'awa tare da kyakkyawan halaye, marasa kyau, sunadarai da lalata jiki da lalata:
»Mafi kyawun aikin aiki
»Babban Amincewa
»Ladadancin Ayyukan Torque
»Madalla da suturar rufe ido
»Kewayon aikace-aikace
»Kewayon mai tunani
»An tsara shi don takamaiman aikace-aikace
4. Girman girma: 2 ''-24''
5. Oem yarda
Girman kujerar roba (Naúrar: lnch/mm)
| Inci | 1.5 " | 2 " | 2.5 " | 3 " | 4 " | 5 " | 6 " | 8 " | 10 " | 12 " | 14 " | 16 " | 18 " | 20 " | 24 | 28 " | 32 " | 36 " | 40 " |
| DN | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | 700 | 800 | 900 | 1000 |
