Elu

Nkọwa mkpụmkpụ:

FKM / PTFE Valve oche jikọtara Valve Gasket maka Concentric Butterfly Valve


Nkọwa ngwaahịa

Mkpado ngwaahịa

N'obodo nchịkwa òtù na-ahụ maka ọrụ, iguzosi ike n'ezi ihe na ntụkwasị obi nke valve mejupụtara bụ ihe na-egosi. Sanshen flastine na-eduga n'ụzọ nri dị ụtọ nke mkpụrụ osisi na-acha odo odo na-eduga linerfly liner, obere nke injinịa nke oge a mere iji nye arụmọrụ na-enweghị atụ na ngwa dị iche iche. A na-eme ka usoro ihe ngwọta dị elu a na-eme ka ọ bụrụ ihe siri ike iji lekọta usoro ihe siri ike nke usoro akwara Butterfly, na-agba mbọ ihi ụra - akara siri ike nke na-ada ule oge na nrụgide.

WhatsApp/WeChat:+8615067244404
Nkọwa ngwaahịa zuru ezu
Ihe: PTFE+EPDM Okpomọkụ: - 40 ℃ ~ 135 ℃
Mgbasa ozi: Mmiri Nha ọdụ ụgbọ mmiri: DN50-DN600
Ngwa: Valve butterfly Aha ngwaahịa: Ụdị Wafer Centerline Soft Sealing Butterfly Valve, Pneumatic Wafer Butterfly Valve
Agba: Nwa Njikọ: Wafer, Flange kwụsịrị
oche: EPDM/NBR/EPR/PTFE,NBR,Rubber,PTFE/NBR/EPDM/VITON Ụdị Valve: Valve Butterfly, Lug Ụdị Ugboro abụọ Half Shaft Butterfly Valve enweghị pin

PTFE jikọtara ya na oche Valve EPDM Maka Centerline Butterfly Valve 2 - 24''

 

A PTFE + EPDM nru ububa oche bụ ihe oche valve ihe ngwakọta nke polytetrafluoroethylene (PTFE) na ethylene propylene diene monomer (EPDM). Ọ nwere nkọwapụta arụmọrụ yana nha ndị a:


Nkọwapụta arụmọrụ:
Nguzogide corrosion kemịkalụ mara mma, nwere ike iguzogide mgbasa ozi na-emebi emebi dị iche iche;
Nguzogide iyi siri ike, nwee ike idowe ọdịdị ya na arụmọrụ ya ọbụlagodi n'okpuru ọnọdụ nrụgide dị elu;
Ịrụ ọrụ mkpuchi dị mma, nwee ike ịnye akara a pụrụ ịdabere na ya ọbụna n'okpuru nrụgide dị ala;
Ezigbo ọnọdụ okpomọkụ, ike iguzogide ọtụtụ okpomọkụ sitere na - 40 Celsius C ruo 150 Celsius.


Nkọwa akụkụ:
Dị na nha dị iche iche sitere na sentimita 2 ruo 24 n'obosara;
Enwere ike ime ya ka ọ dabara ụdị valvụ nru ububa dị iche iche, gụnyere wafer, lug, na ụdị flanged;
Enwere ike ịhazi ya ka ọ dabara nke ọma ngwa chọrọ.

 

 

Nha (dayamita)

Ụdị Valve dabara adaba
2 sentimita asatọ Wafer, Lug, Flanged
3 sentimita asatọ Wafer, Lug, Flanged
4 sentimita asatọ Wafer, Lug, Flanged
6 sentimita asatọ Wafer, Lug, Flanged
8 sentimita asatọ Wafer, Lug, Flanged
10 sentimita asatọ Wafer, Lug, Flanged
12 sentimita asatọ Wafer, Lug, Flanged
14 sentimita asatọ Wafer, Lug, Flanged
16 sentimita asatọ Wafer, Lug, Flanged
18 sentimita asatọ Wafer, Lug, Flanged
20 sentimita asatọ Wafer, Lug, Flanged
22 sentimita asatọ Wafer, Lug, Flanged
24 sentimita asatọ Wafer, Lug, Flanged

 

Oke okpomọkụ

Nkọwa oke okpomọkụ
- 40 Celsius C ruo 150 Celsius C Kwesịrị ekwesị maka ngwa oke okpomọkụ


Na obi anyị bụ ngwakọta pụrụ iche nke PTFE na EPDM, ihe a ma ama maka oke ọgwụ mgbochi ọgwụ ha pụrụ iche, ịdịte aka na ntụkwasị obi gafee na - 40 ℃ 135 ℃. Ngwakọta a abụghị naanị isi ihe na ihe ọ bụla - ọgwụ mgbochi kemịkal na-enweghị atụ, na-agbanwe agbanwe na-enweghị ike iji nweta mgbasa ozi dị iche iche, gụnyere mmiri, n'okpuru ọnọdụ ndị dị iche iche. Ezubere maka wafer na flices na si ọdụ ụgbọ mmiri sitere na DN50 ruo DN600, mgbaaka na-agba mgbaaka dị mma maka ngwa chọrọ nchịkwa na-aga n'ihu. Ngwaahịa ngwaahịa na-agụnye nhọrọ dị iche iche maka ngwa dị iche iche, site na warara dị larịị sochiri anụ na-adịghị mma na pneumatic Waferves, na ligsdị ọkara nke ọkara nke eriri na-enweghị pin. Site na agba ojii nke na-egosi na ọ dị mma na mma, ọ bụla akara aka ọ bụla iji nye mgbochi mgbochi megide ngwakọta, na-akwado ọrụ arụmọrụ nke eriri afọ gị. Ndokwa Sanshen na ihe ohuru na-eme ka mgbaaka nrutu nke nrutu nke a na-eme ka usoro ihe eji eme ya na ihe ndi n'enye ntukwasi obi, ogologo oru.
  • Nke gara aga:
  • Osote:
    • Pịa tinye ka ịchọọ ma ọ bụ ESC mechie