Keystone Teflon Butterfly Valve akara mgbanaka - Ogologo Ogologo Kacha Elu

Nkọwa mkpụmkpụ:

FKM / PTFE Valve oche jikọtara Valve Gasket maka Concentric Butterfly Valve


Nkọwa ngwaahịa

Mkpado ngwaahịa

Ewebata usoro kachasị elu maka mkpa ọfụma gị, keystone teflon akara mgbanaka, ọkàrà na-eme nke ọma site na Sanshineng plastine plastik. Ọkpụkpụ akwụkwọ anyị - Akụkụ valvụ dị larịị bụ injin nke injin na-ebuli arụmọrụ na ntụkwasị obi nke valves gị, na-ekwe nkwa na ikike akara pụrụ iche na ụlọ ọrụ. Ewuru site na elu - ogo nke PTFE na EPDM, akara ngosi a na-ekwe nkwa na oke okpomoku na iguzogide oke okpomoku, site na dika odi ala na 135 ℃. Nchikota ihe eji eme ihe puru iche abughi na-ana achi achi ogologo ozi ogologo kamakwa na-enye ya mgbanwe na-enweghị atụ, na-eme ya nhọrọ kachasị mma maka ngwa ndị ọrụ na mgbasa ozi ndị ọzọ n'ofe ndị ọzọ.

WhatsApp/WeChat:+8615067244404
Nkọwa ngwaahịa zuru ezu
Ihe: PTFE+EPDM Okpomọkụ: - 40 ℃ ~ 135 ℃
Mgbasa ozi: Mmiri Nha ọdụ ụgbọ mmiri: DN50-DN600
Ngwa: Valve butterfly Aha ngwaahịa: Ụdị Wafer Centerline Soft Sealing Butterfly Valve, Pneumatic Wafer Butterfly Valve
Agba: Nwa Njikọ: Wafer, Flange kwụsịrị
oche: EPDM/NBR/EPR/PTFE,NBR,Rubber,PTFE/NBR/EPDM/VITON Ụdị Valve: Valve Butterfly, Lug Ụdị Ugboro abụọ Half Shaft Butterfly Valve enweghị pin

PTFE jikọtara ya na oche Valve EPDM Maka Centerline Butterfly Valve 2 - 24''

 

A PTFE + EPDM nru ububa oche bụ ihe oche valve ihe ngwakọta nke polytetrafluoroethylene (PTFE) na ethylene propylene diene monomer (EPDM). Ọ nwere nkọwapụta arụmọrụ yana nha ndị a:


Nkọwapụta arụmọrụ:
Nguzogide corrosion kemịkalụ mara mma, nwere ike iguzogide mgbasa ozi na-emebi emebi dị iche iche;
Nguzogide iyi siri ike, nwee ike idowe ọdịdị ya na arụmọrụ ya ọbụlagodi n'okpuru ọnọdụ nrụgide dị elu;
Ịrụ ọrụ mkpuchi dị mma, nwee ike ịnye akara a pụrụ ịdabere na ya ọbụna n'okpuru nrụgide dị ala;
Ezigbo ọnọdụ okpomọkụ, ike iguzogide ọtụtụ okpomọkụ sitere na - 40 Celsius C ruo 150 Celsius.


Nkọwa akụkụ:
Dị na nha dị iche iche sitere na sentimita 2 ruo 24 n'obosara;
Enwere ike ime ya ka ọ dabara ụdị valvụ nru ububa dị iche iche, gụnyere wafer, lug, na ụdị flanged;
Enwere ike ịhazi ya ka ọ dabara nke ọma ngwa chọrọ.

 

 

Nha (dayamita)

Ụdị Valve dabara adaba
2 sentimita asatọ Wafer, Lug, Flanged
3 sentimita asatọ Wafer, Lug, Flanged
4 sentimita asatọ Wafer, Lug, Flanged
6 sentimita asatọ Wafer, Lug, Flanged
8 sentimita asatọ Wafer, Lug, Flanged
10 sentimita asatọ Wafer, Lug, Flanged
12 sentimita asatọ Wafer, Lug, Flanged
14 sentimita asatọ Wafer, Lug, Flanged
16 sentimita asatọ Wafer, Lug, Flanged
18 sentimita asatọ Wafer, Lug, Flanged
20 sentimita asatọ Wafer, Lug, Flanged
22 sentimita asatọ Wafer, Lug, Flanged
24 sentimita asatọ Wafer, Lug, Flanged

 

Oke okpomọkụ

Nkọwa oke okpomọkụ
- 40 Celsius C ruo 150 Celsius C Kwesịrị ekwesị maka ngwa oke okpomọkụ


A na-eme ka mgbanaka Teflon nke tefvel na-eme ka ọ dị mma na njikọ wafer na fliges, na-eme ka ọpụpụ. Ọ dị mma maka ụdị nke ọdụ ụgbọ mmiri buru ibu, site na DN50 ruo DN600, na-ejide zuru oke maka ihe fọrọ nke nta ka ọ bụrụ ngwa eriri afọ ọ bụla. Agba ojii nke akara mgbanaka ahụ na-agbakwunye mmetụ nke ọkachamara na nzukọ Valvụ, ebe nhọrọ nke oche nke oche - Gụnyere EPDM, NBR, EPR, PTFE, na Virton - Na-enye mgbanwe iji họrọ nhọrọ kacha mma nke na-ezute ihe ndị akọwapụtara. Site na ngwa ya na abụọ pneumatic Waferves varves na ligdị ọkara nke ọkara nke eriri anọ na-enweghị isi na teknụzụ valvụ. Ma ị na-emeso dị elu - ọnọdụ nke nrụgide ma ọ bụ ọnọdụ ịdị ọcha, keystone Teflon akara na-enweghị atụ na-enweghị ike na arụmọrụ gị nke ọma. Tụkwasịnụ obi na ahụmịhe anyị iji nye gị ihe ngosi akara ọ bụghị naanị na-ezute ma gafere ụkpụrụ ụlọ ọrụ.
  • Nke gara aga:
  • Osote:
    • Pịa tinye ka ịchọọ ma ọ bụ ESC mechie