PATA - - Sansheng polasetiki
| Lintho tse bonahalang: | PTFE + EPDM | Mocheso: | - 40 ℃ ~ 135 ℃ |
|---|---|---|---|
| Media: | Metsi | Boholo ba Port: | Dn50 - DN600 |
| Kopo: | Serurubele se boholo | Lebitso la sehlahisoa: | Wafer (mofuta oa sethala se matla se tiisitsoeng sa serurubele, serurubele sa polasetiki sa polasetiki sa Waterfly |
| 'Mala: | E ntšo | Khokahano: | Waterrath, flae e fela |
| Setulo: | EPDM / NBRS / EPRF / EPRF, rabara | Mofuta oa Valve: | Serurubele se serurubele, sa mofuta oa mofuta oa mofuta oa shaft belkly ha a ka sebatli se se nang pin |
PTFE e ne e na le setulo sa EPDM Valve bakeng sa serurubele se bohareng ba serurubele 2 - 24 ''
Setulo sa sejana sa PTFE + EPFE E na le litlhaloso tse latelang le boholo ba 'nete:
Tlhaloso ea Ts'ebetso:
Khanyetso e ntle ea lik'hemik'hale, ea khonang ho mamella mecha ea litaba e fapaneng ea li-crosidence;
Ho Ts'oara Lithapo tse matla, li khona ho boloka sebopeho le ts'ebetso le ts'ebetso e ntse e le holimo - maemo a sithabetsang;
Ts'ebetso e ntle ea ho tiisa, e khona ho fana ka tiiso e tšepahalang le e le tlasa khatello e tlaase;
Ho hanyetsa mocheso o motle, ho khona ho mamella mocheso o fapaneng oa mocheso ho tsoa ho - 40 ° C ho 150 ° C.
Tlhaloso:
E fumaneha ka boholo bo fapaneng ho tloha ho lisenthimithara tse 24 ho isa ho tse 24 tsa bophara ba lisenthimithara;
E ka rereloa ho lekana mefuta e fapaneng ea li-valafly li-valvesly li-valvesly tsa serurubele, ho kenyeletsoa le hole, le litlolo le mefuta;
E ka etsoa e le tloaelo ho lekana litlhoko tse tobileng tsa kopo.
|
Boholo (bophara) |
Mofuta o loketseng oa VALVE |
|---|---|
| li-inche tse 2 | Wafer, lug, ea foka |
| Li-inches tse 3 | Wafer, lug, ea foka |
| Li-inches tse 4 | Wafer, lug, ea foka |
| Li-inches tse 6 | Wafer, lug, ea foka |
| Li-inches tse 8 | Wafer, lug, ea foka |
| Lisenthimithara tse 10 | Wafer, lug, ea foka |
| 12 inches | Wafer, lug, ea foka |
| 14 inches | Wafer, lug, ea foka |
| Li-inches tse 16 | Wafer, lug, ea foka |
| Li-inches tse 18 | Wafer, lug, ea foka |
| Li-inches tse 20 | Wafer, lug, ea foka |
| Li-inches tse 22 | Wafer, lug, ea foka |
| 24 inch | Wafer, lug, ea foka |
|
Mocheso oa mocheso |
Tlhaloso ea mocheso oa mocheso |
|---|---|
| - 40 ° C ho 150 ° C | E loketse lits'ebetso tse ngata tsa mocheso |
Ka pelong ea sehlahisoa sa rona ke sebopeho se kopaneng sa PTF le EPDM. Motsoako ona ha o fane ka khatiso e ikhethang feela empa e netefalletsa ts'ebetso e phahameng ho tloha ho mocheso o pharalletseng ho tloha - 40 ℃ ho e etsa khetho e ntle bakeng sa lits'ebetso. Hore na ke metsi kapa mecha ea litaba e 'ngoe, litulo tsa rona tsa lijalo li netefatsa hore na o ile oa ntlafatsa ts'ebetso ea mahala le ho fokotsa lintho. Khokahano ea ho ts'oaroa le ho feta ea forering - Litulo tsa bohlokoa tsa bray PTFA li fumaneha bakeng sa DN50 ho DN600, e tšoarela seboko sa litlhoko tsa indasteri. Ho se sebetse hantle ha sehlahisoa sa rona ho qala ho ikamahanya le maemo a eona a ho ikamahanya le maemo a eona a valve ka mefuta ea li-valve, ho kenyelletsa le li-valter tsa sejana se bonolo le seg sa halofo ea shaft. Litulo tsa rona tsa li-valve, li fumaneha ka 'mala o motšo oa botala, ha o etse feela mekhoa ea hau e seng molaong, e netefatsa boipiletso ka bobeli ba boipiletso ba hau bo sebetsang le boipiletso bo akaretsang ba ts'ebetso. E na le polasetiki ea santheng forlic, e-ba le mochine oa litulo tsa Valve o matlafatsang lits'ebetso tsa hau hantle, ka ho sebetsa hantle le ka mokhoa o tšepahalang le ka botšepehi.