Phahameng-Boleng EPDM PTFE Compound Butterfly Valve Seat - Sansheng
| Mmala: | Ntsho | Boitsebiso: | Rabara ea Tlhaho |
|---|---|---|---|
| Mocheso: | - 50-150 likhato | Lebitso la Sehlahiswa: | Elastic Butterfly Valve Seat |
| Mecha ea litaba e Loketseng: | Metsi, metsi a nooang, metsi a nooang, metsi a litšila ... | Ho thatafala: | 65 ± 3 ° C |
| Leseli le Phahameng: |
setulo sa rabara serurubele valve, litulo ductile tšepe valve, Anti Animal Butterfly Valve Seat |
||
Anti-phoofolo le oli ea meroho e nepahetsengNeoprene (CR) Butterfly Valve Seat
Neoprene (Kr)
Neoprene, Polychloroprene e entsoe ka cloroprenene monomer polymeriation. Kamora ho baka kutu, e na le litšila tse ntle tsa rabara le ho hanyetsa. Ke ani -insolation Ebile e na le khanyetso e ntle ea boemo ba leholimo, e thibelang ho hlomoha ho mabifi, lihatsetsi, li-silite acid, empa li sa loants'a phosphaten oli ea hydraulic. Ho bonolo ho cheka le ho thatafatsa ka mocheso o tlase, o fokolang oa polokelo le keketseho e kholo ea oli ea liminerale. Ho sebelisa molumo oa mocheso ke - 50 ~ 150 degree.
Melemo:
Forama e ntle ea ho qubu e ntle le Deformation e ntle ea khatello ea maikutlo, foromo ena e se na sebabole, kahoo ho bonolo haholo ho e sebetsa. E na le Anti - Mefuta ea oli ea liphoofolo le ea meroho, e ke ke ea angoa ke lik'hemik'hale tsa ho se nke lehlakore, mafura, oli, hape e na le li-anti -
Mefokolo:
Se ke ua khothaletsa ho sebelisa li-acid tse matla, li-nits, esters, chloroform le bamik'hale kemik'hale
Kopo:
Likarolo tsa rabara kapa likarolo tse tsitsitseng le sehatsetsi sa R12, lisebelisoa tsa lelapa. E loketseng lihlahisoa tsa rabare tse amanang le moea, likarolo tsa letsatsi, li-ozone, li hanyetsa mollo le komiti ea lik'hemik'hale.
Setifikeiti:
KTW W270 EN681-1,ACS,NSF61/372;WRAS,EC1935;FDA,EC1935;REACH,ROHS
Melemo ea rona:
1. Rubber le lisebelisoa tsa moralo li tlamahane ka thata.
2. E babatsehang rabara elasticity le compression sete.
3. Boholo bo tsitsitseng ba setulo le torque e nyenyane, ho tiisa ho babatsehang le ho roala thepa ea ho hanyetsa.
4. Lisebelisoa tsa rabara li amohela lihlahisoa tsa machaba tse nang le ts'ebetso e tsitsitseng.
5. Boitsebiso: CR, NR, SBR, NBR, EPDM, PTFE, Silicone, joalo-joalo.
6. Setifikeiti: NSF, SGS,KTW,FDA,ISO9001,ROHS,
7. Ho hanyetsa mocheso o phahameng / o tlase, ho hanyetsa oli le mafura, ho thibela moea o motle joalo-joalo.
8. Ts'ebetso le ho paka ho latela litlhoko tsa hau.
9. Kopo: Taolo ea metsi, elektroniki, lisebelisoa tsa ntlo, likoloi, indasteri ea lisebelisoa tsa bongaka, mochini oa indasteri & likarolo, joalo-joalo.
Tafole ea Khetho e Potlakileng ea Lintho Tse Amanang:
| Lintho tse bonahalang | Temp e loketseng. | Litšobotsi |
| NBR |
- 35 ℃ ~ 100 ℃ Hang-hang -40℃~125℃ |
Rabara ea nitrile e na le thepa e ntle ea ho atolosoa, e hanyetsanang le abrasion le hydrocarbon-e hananang le eona. E ka sebelisoa e le lisebelisoa tse akaretsang bakeng sa metsi, vacuum, acid, letsoai, alkali, grease, oli, botoro, oli ea hydraulic, glycol, joalo-joalo e ke ke ea sebelisoa libakeng tse kang acetone, ketone, nitrate, le hydrocarbon fluorinated. |
| EPDM |
-40 ℃ ~ 135 ℃ Hang-hang -50℃~150℃ |
Ethylene-propylene rabara ke kakaretso e ntle - rabara ea maiketsetso e ka sebelisoang litsing tsa metsi a chesang, lino, lihlahisoa tsa lebese, ketone, joala, nitrate, le glycerin, empa eseng ka hydrocarbon-oli e thehiloeng ho hydrocarbon, inorganics, kapa solvents.
|
| CR |
- 35 ℃ ~ 100 ℃ Hang-hang -40℃~125℃ |
Neoprene e sebelisoa mecheng ea litaba e kang li-acids, oli, mafura, butters le solvents 'me e na le khanyetso e ntle ea ho hlasela. |
| FKM |
20 ℃ ~ 180 ℃
|
Fluerobberber ke hydrocarbober e ntle - oli e thibelang rabara ea hydrocarbon bakeng sa khase ea mafura le lihlahisoa tse ling tsa petrole. E loketse metsi, oli, moea, asiti le mecha ea litaba e 'ngoe, empa e ke ke ea sebelisoa bakeng sa mouoane, metsi a chesang kapa ea c.cker ho feta 82 ° C. Sistimi ea alkali. |
| SR | - 70 ℃ ~ 200 ℃ | Rabara ea silicone e hanyetsana le mocheso o phahameng, mocheso o tlaase le thepa e tsitsitseng ea lik'hemik'hale, 'me e sebelisoa haholo liindastering tse kang acid e matla, alkali e fokolang le lijo. |
Lisebelisoa tse khethehileng: rabara ea nitrile e nang le carboxylated, rabara ea nitrile e nang le hydrogenated, corrosion-resistant ethylene-propylene rabara, mouoane-e manganga fluoroelastomer, chlorosulfonated polyethylene |
||
O ile a qaptjoa ho tsoa ho motsoako oa EPDM (Ethylene propylene Dine Monommer) Meetso e ikhethang ea lintho tse bonahalang e tiisa hore setulo se futhumetseng se sa khone ho ba le linako tse phahameng, ho tloha tlase ho tloha - degrees tse 50 tsa Celsius. Ho tloaelana hona ho etsa hore e loketse mefuta e fapaneng ea media, ho kenyelletsa metsi, metsi a boima, ka tsela e fapaneng a fanang ka tharollo e fapaneng ea likopo tsa indasteri ea indasteri. 'Mala o motšo o supa matla le ho tšoarella ha thepa eo, ho etsa hore ho be le tlamo ho tlisang tšebetso ea serurubele. Karolo ea rabara ea sebopeho sa tlhaho e eketsa ka thepa e makatsang ea li-valve, e lumella tiiso e tiileng le ho nyenyefatsa kotsi ea ho tsoa. Phahamisa litekanyetso tsa moralo oa litulo tsa valve, setulo sa serute sa elastfly ha se karolo feela; Ke letlotlo le bonoang bakeng sa ho netefatsa katleho, ho ts'epahala le polokeho ea litsamaiso tsa hau tsa mokelikeli. Ka polasetiki ea santheng, bareki ba tiisetsoa sehlahisoa se kopanyang saense ea thepa e ncha e nang le melemo ea boitsebiso e ntle ea phepelo ea li-vve ea Liipomelong.