High-Quality Sanitary EPDM+PTFE Compounded Butterfly Valve Liner
| Mmala: | Ntsho | Boitsebiso: | Rabara ea Tlhaho |
|---|---|---|---|
| Mocheso: | - 50-150 likhato | Lebitso la Sehlahiswa: | Elastic Butterfly Valve Seat |
| Mecha ea litaba e Loketseng: | Metsi, metsi a nooang, metsi a nooang, metsi a litšila ... | Ho thatafala: | 65 ± 3 ° C |
| Leseli le Phahameng: |
setulo sa rabara serurubele valve, litulo ductile tšepe valve, Anti Animal Butterfly Valve Seat |
||
Anti-phoofolo le oli ea meroho e nepahetsengNeoprene (CR) Butterfly Valve Seat
Neoprene (Kr)
Neoprene, Polychloroprene e entsoe ka cloroprenene monomer polymeriation. Kamora ho baka kutu, e na le litšila tse ntle tsa rabara le ho hanyetsa. Ke ani -insolation Ebile e na le khanyetso e ntle ea boemo ba leholimo, e thibelang ho hlomoha ho mabifi, lihatsetsi, li-silite acid, empa li sa loants'a phosphaten oli ea hydraulic. Ho bonolo ho cheka le ho thatafatsa ka mocheso o tlase, o fokolang oa polokelo le keketseho e kholo ea oli ea liminerale. Ho sebelisa molumo oa mocheso ke - 50 ~ 150 degree.
Melemo:
Forama e ntle ea ho qubu e ntle le Deformation e ntle ea khatello ea maikutlo, foromo ena e se na sebabole, kahoo ho bonolo haholo ho e sebetsa. E na le Anti - Mefuta ea oli ea liphoofolo le ea meroho, e ke ke ea angoa ke lik'hemik'hale tsa ho se nke lehlakore, mafura, oli, hape e na le li-anti -
Mefokolo:
Se ke ua khothaletsa ho sebelisa li-acid tse matla, li-nits, esters, chloroform le bamik'hale kemik'hale
Kopo:
Likarolo tsa rabara kapa likarolo tse tsitsitseng le sehatsetsi sa R12, lisebelisoa tsa lelapa. E loketseng lihlahisoa tsa rabare tse amanang le moea, likarolo tsa letsatsi, li-ozone, li hanyetsa mollo le komiti ea lik'hemik'hale.
Setifikeiti:
KTW W270 EN681-1,ACS,NSF61/372;WRAS,EC1935;FDA,EC1935;REACH,ROHS
Melemo ea rona:
1. Rubber le lisebelisoa tsa moralo li tlamahane ka thata.
2. E babatsehang rabara elasticity le compression sete.
3. Boholo bo tsitsitseng ba setulo le torque e nyenyane, ho tiisa ho babatsehang le ho roala thepa ea ho hanyetsa.
4. Lisebelisoa tsa rabara li amohela lihlahisoa tsa machaba tse nang le ts'ebetso e tsitsitseng.
5. Boitsebiso: CR, NR, SBR, NBR, EPDM, PTFE, Silicone, joalo-joalo.
6. Setifikeiti: NSF, SGS,KTW,FDA,ISO9001,ROHS,
7. Ho hanyetsa mocheso o phahameng / o tlase, ho hanyetsa oli le mafura, ho thibela moea o motle joalo-joalo.
8. Ts'ebetso le ho paka ho latela litlhoko tsa hau.
9. Kopo: Taolo ea metsi, elektroniki, lisebelisoa tsa ntlo, likoloi, indasteri ea lisebelisoa tsa bongaka, mochini oa indasteri & likarolo, joalo-joalo.
Tafole ea Khetho e Potlakileng ea Lintho Tse Amanang:
| Lintho tse bonahalang | Temp e loketseng. | Litšobotsi |
| NBR |
- 35 ℃ ~ 100 ℃ Hang-hang -40℃~125℃ |
Rabara ea nitrile e na le thepa e ntle ea ho atolosoa, e hanyetsanang le abrasion le hydrocarbon-e hananang le eona. E ka sebelisoa e le lisebelisoa tse akaretsang bakeng sa metsi, vacuum, acid, letsoai, alkali, grease, oli, botoro, oli ea hydraulic, glycol, joalo-joalo e ke ke ea sebelisoa libakeng tse kang acetone, ketone, nitrate, le hydrocarbon fluorinated. |
| EPDM |
-40 ℃ ~ 135 ℃ Hang-hang -50℃~150℃ |
Ethylene-propylene rabara ke kakaretso e ntle - rabara ea maiketsetso e ka sebelisoang litsing tsa metsi a chesang, lino, lihlahisoa tsa lebese, ketone, joala, nitrate, le glycerin, empa eseng ka hydrocarbon-oli e thehiloeng ho hydrocarbon, inorganics, kapa solvents.
|
| CR |
- 35 ℃ ~ 100 ℃ Hang-hang -40℃~125℃ |
Neoprene e sebelisoa mecheng ea litaba e kang li-acids, oli, mafura, butters le solvents 'me e na le khanyetso e ntle ea ho hlasela. |
| FKM |
20 ℃ ~ 180 ℃
|
Fluerobberber ke hydrocarbober e ntle - oli e thibelang rabara ea hydrocarbon bakeng sa khase ea mafura le lihlahisoa tse ling tsa petrole. E loketse metsi, oli, moea, asiti le mecha ea litaba e 'ngoe, empa e ke ke ea sebelisoa bakeng sa mouoane, metsi a chesang kapa ea c.cker ho feta 82 ° C. Sistimi ea alkali. |
| SR | - 70 ℃ ~ 200 ℃ | Rabara ea silicone e hanyetsana le mocheso o phahameng, mocheso o tlaase le thepa e tsitsitseng ea lik'hemik'hale, 'me e sebelisoa haholo liindastering tse kang acid e matla, alkali e fokolang le lijo. |
Lisebelisoa tse khethehileng: rabara ea nitrile e nang le carboxylated, rabara ea nitrile e nang le hydrogenated, corrosion-resistant ethylene-propylene rabara, mouoane-e manganga fluoroelastomer, chlorosulfonated polyethylene |
||
Setulo sa rona sa lifofane se enjene ho fana ka tiiso ea serurubele, empa e tiileng ea li-sepache se serurubele, e ntlafatsa katleho ea tsona le ho tšepahala ha tsona. Motsoako o ikhethang oa EPDM le PTF o tiisa hore leraba le lula le tiile tlasa maemo a fapaneng a khatello, ho thibela katleho le ho netefatsa boemo bo sireletsehileng. Ho tsamaisana le metsi ka metsi, metsi a litšila le metsi a litšila a emela boitlamo ba rona ba ho chesoa ke litlhoko tsa bareki ba rona. Sebapali sa santheng Fluorine, re utloisisa bohlokoa ba tlhabollo ea taolo ea taolo ea metsi a tšepahalang. Kahoo, re se re le ngata haholo ho ba le Valvely Valglef ea serui + ptfe e neng e feta ea li-seturm ea li-stramba e sa fetaneng le ho feta ea indasteri empa e fana ka tharollo e botsoalle ho moreki oa rona ea hlomphuoang. Ka ho khetha sehlahisoa sa rona, ha u na setulo sa valaje; U ntse u tsetela ka ho tšoarella, e sebetsang hantle le karolo e ncha e nang le boiphihlelo e tla phahamisa ts'ebetso ea lits'ebetso tsa metsi a hau ho fetisisa.